Explosion-Proof Emergency Lights & Exit Signs
BEACON emergency lights, exit signs and combination units alongside VECTOR battery-backed linear fixtures for classified and harsh industrial locations. Selected configurations carry C1D2 or C2D1 markings, with 8 W and 15 W heads, 100-277 V AC input, sealed housings and self-test options. Combination exit and emergency units cover egress marking and illumination in a single fixture.
- Canada-wide project support
- UL & cUL certified models
- IES-based layouts
- Technical fixture review
Product catalog
Filter by classification and fixture type to narrow the range. Every model links to its full specifications, certification records and photometric files.
3 models shown
BEACON Hazardous-Location Emergency Light — C1D2
- 100-277V/AC
- Wall mount
Emergency Lighting
BEACON Hazardous-Location Exit Sign & Emergency Light Combo
- 100-277V/AC
- Wall mount
Emergency Lighting

VECTOR Series Emergency Battery Back-up - LED Hazardous Location Linear Light - C1D2/C2D1
- 30–80 W · 5,100–13,600 lm
- 100-277V / 347-480V
- 11 mounting options
Linear Lighting
Compare available models
Compare classification, output and voltage across the models in this category. Full marking details, Canadian certification records and IES files are on each product page.
| Model | Classification | Power and output | Voltage | Review |
|---|---|---|---|---|
| BEACON Hazardous-Location Emergency Light — C1D2 | C1D2 | Varies by configuration | 100-277V/AC | Review → |
| BEACON Hazardous-Location Exit Sign & Emergency Light Combo | C1D2 | Varies by configuration | 100-277V/AC | Review → |
| VECTOR Series Emergency Battery Back-up - LED Hazardous Location Linear Light - C1D2/C2D1 | C2D1 · C1D2 | 30–80 W · 5,100–13,600 lm | 100-277V / 347-480V | Review → |
Typical Applications
- Emergency floodlights for classified routes
- Exit signs with red, green or running-man legends
- Combination exit signs with emergency lamp heads
- Battery-backed linear lighting for qualifying areas
Specifications at a glance
- Selected configurations marked C1D2 or C2D1
- BEACON emergency, exit-sign and combination formats
- 100–277 V input options shown in the catalogue builder
- Model-specific spec sheet and part number
Choose the emergency-lighting format first
Start with the life-safety function, then check the hazardous-location marking and emergency performance of the exact configuration. A wet-location or ingress rating alone is not a hazardous-location approval.
- 1
Emergency illumination
Choose a BEACON emergency floodlight when the route needs battery-mode illumination without an exit legend.
- 2
Exit identification
Choose the required EXIT colour or running-man direction, in single- or double-sided faces with wall, ceiling and end mounting.
- 3
Combined function
Use a combination unit when one location needs both exit identification and emergency lamp-head output.
- 4
Continuous linear light
Evaluate a battery-backed VECTOR linear fixture where the normal luminaire must also support the emergency layout.
Related Industries
Related selection guides
Zones vs Divisions Hazardous Locations Canada
Zones vs divisions hazardous locations Canada questions show up on specs, drawings, and nameplates. This guide explains how the two systems map and when each one controls.
Explosion Proof Nameplate T-Code and EPLs
An explosion proof nameplate T-code, EPL, and group marking tell you whether a luminaire fits the zone and atmosphere. Here is how to read the markings before you buy.
Frequently Asked Questions
Common questions about explosion-proof emergency lights & exit signs and hazardous location requirements.
Get your fixture schedule reviewed
Send the classification drawing, fixture schedule or lighting requirements. We will compare suitable models, applicable records and lead times before quoting.

